Filter
Top Products
PAGE 54
Installer Menu (Continued)
Menu Item Function Value Range Default Value Brief Description of Function and Comments
035 COMPPORT EN. 0 / 1 1 Set to 1 to enable HDMI. Set to 0 to disable.
036 FRONT Y/C EN. 0 / 1 1 Set to 1 to enable panel HDMI 2 input.
038 YPrPb EN. 0 / 1 1 Set to 1 to enable display panel Component 1 input jacks.
039 REAR AUX EN 0 / 1 1 Set to 1 to enable display panel Video 1 input jack.
046 STRT AUX SRCE 1 ~ 8, 255 255 Sets the starting AUX source.
047 AUX STATUS 0 / 1 0 Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time display.
069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Text display.
070 FOR. CH-TIME 0 ~ 7 2 Chooses custom foreground color for the Text display.
071 BCK. CH-TIME 0 ~ 7 2 Chooses custom background color for the Text display.
073 CH NOT AVBLE 0 / 1 0 If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed
when directly accessing a channel not in the favorite channel list.
075 REVERT CH 0 / 1 0 If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
078 UPN MSB 0 ~ 255 0 User programmable number, most significant byte.
079 UPN MSB-1 0 ~ 255 0 User programmable number, most significant byte - 1.
080 UPN MSB-2 0 ~ 255 0 User programmable number, most significant byte - 2.
081 UPN LSB 0 ~ 255 0 User programmable number, least significant byte.
082 CHKSM ERROR 0 / 1 1 Enforces rigid M.P.I. checksum.
083 HANDSHK TIME 0 ~ 5 5 Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
084 PERMANENT BLK 0 / 1 0 Removes block hours setting for Parental Control and makes block permanent.
087 REAR RGB EN. 0 ~ 2 1 Set to 1 for DTV. Set to 2 for PC. Set to 0 to disable.
088 EN NOISE MUTE 0 / 1 1 If set to 1, mutes audio if no signal is present.
091 YPrPb2 EN. 0 / 1 1 Set to 1 to enable Component 2 input jacks.
092 RGB2 ENABLE 0 ~ 2 2 Set to 1 for DTV. Set to 2 for PC. Set to 0 to disable.
093 RJP AVAILABLE 0 / 1 0 Set to 1 to enable.
094 SAP MENU EN 0 / 1 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096 DEF. ASP. RATIO 0, 1, 2, 4, 5 2 Sets default aspect ratio at power up. See detailed descriptions and item 106.
102 ATSC BAND 0 ~ 4 4 Selects ATSC band.
103 ATSC TUNE MODE 0 / 1 1 Sets ATSC tuning mode. Set to 0 for virtual channels, set to 1 for physical channels.
104 START MINOR CH 0 ~ 255 0 Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
105 VID OUT FORMAT 0 ~ 2 1 0=1080i, 1=720p, 2=480p
106 ASP RATIO LOCK 0 / 1 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
107 BANNER SELECT N/A N/A Not applicable.
108 PANEL COM 0 ~ 3 2 0=1200, 1=2400, 2=9600, 3=115200
110 PANEL DELAY 0 ~ 15 8 Sets panel delay time.
111 PANEL VOL PRE 0 ~ 100 20 Panel preset volume to achieve the same volume levels as other systems.
112 PANEL STRT VOL 0 ~ 100 20 Panel start volume when on Aux. input.
113 PANEL TYPE 0 ~ 4 2 Selects panel type.
114 PANEL MIN VOL 0 ~ 100 0 Sets panel minimum volume level.
115 PANEL MAX VOL 0 ~ 100 100 Sets panel maximum volume level.
116 VIDEO MUTE EN 0 / 1 0 Set to 0 for normal, set to 1 for Blank.
117 FACT DEFAULT 0 / 1 0 0=Normal. 1=Loads factory default presets of all above settings.
Installer Menu Items 035 through 117