1
1-8 Operating the iR C2100/2100S
Print screen
When the iR C2100/2100S is actively printing a job, the Touch Panel
Display appears as shown below.
• If there is an error during printing, press the Alert key to display details of the
error.
• If there is another job currently processing, press the RIP key to display the
RIP screen.
Rebooting, shutting down, and restarting the
iR C2100/2100S
Generally, you can leave the iR C2100/2100S and the copier/printer running
all the time. This section describes how to reboot, shut down, and restart
when necessary.
Rebooting the iR C2100/2100S
You must reboot the iR C2100/2100S to access Setup menus. When you do
so, fonts that have been downloaded to the hard disk drive are not deleted.
Print jobs in the Hold queue, the Printed queue, and jobs that have been
processed but not printed are not deleted; they will be available for printing
when you restart the iR C2100/2100S.
To reboot the iR C2100/2100S, first make sure no jobs are being processed
or printed (the Data activity light should be off). Then press the Functions
key, press Reboot Server, press Yes, and press OK. For information on
accessing the Setup menus, see “Accessing Setup menus” on page 1-10.
<User Name>
Cancel Job
Alert
RIP
#MB
#v
PS
Info
Print
Functions
PRINT
MONITOR
Press to cancel job currently
printing
Press to display
Info screen
(see page 1-5)
Press to display the
Functions menu
(see page 1-6)
Press to display RIP screen
(see page 1-7)
