5
5-3 Tracking and managing jobs with Fiery WebSpooler
The Spool, RIP, and Print areas of the Fiery WebSpooler window represent
the stages of printing a job. Jobs come in at the top level (Spool) and drop
down to the Print level, unless they are held along the way.
The job icons displayed in the Fiery WebSpooler window are explained in
“Job icons” on page 2-18.
NOTE: In the Fiery WebSpooler window, the background color for the yellow
and white printer icons is the same.
Spooled jobs—Jobs listed in the area below the Spool status bar are
PostScript files stored on the iR C2100/2100S disk. These jobs were sent to
either the Print queue (white icons) or the Hold queue (yellow icons).
RIPped jobs—Jobs listed in the area below the RIP status bar are ready to
print. They have already been rasterized (RIPped, or processed for printing)
and are waiting, in order, for access to the printer. Rasterized jobs can also be
held; held jobs are shown with a yellow icon.
Printed jobs—Jobs listed in the area below the Print status bar have already
been printed. Printed jobs can be stored on the iR C2100/2100S disk. The
number of jobs that can be stored (from 1 to 99) is defined in Setup.
If you are logged in as Administrator or Operator, you can interact with a job
wherever it appears in the window by selecting it and choosing a command
from the Job menu, or by double-clicking the job and setting override
options. See “Manipulating job options and job flow” on page 5-4 for
information.
Errors—Jobs with an error are shown in red. To display the error,
double-click the job line. Note that you cannot check the job properties
or hold a job with an error.
NOTE: Jobs with errors cannot be displayed or held in the Rip area with the
“Hold” command.
NOTE: If your job does not appear anywhere in the Fiery WebSpooler
window, it may have already been printed; if so, it will appear in the Job Log.
To view the Job Log, choose Show Job Log from the Window menu.
(For more information on the Job Log, see page 5-8.)
