2
2-4 Introduction to the Command WorkStation
With the iR C2100/2100S device name (2100S-2100) selected, click OK. If
the device name is not displayed, click the plus sign (+) to expand the
iR C2100/2100S entry.
The Command WorkStation connects to the iR C2100/2100S and you are
prompted to choose a login level and enter a password to log in (see below).
If you have any difficulties connecting to the iR C2100/2100S, see
Appendix A for error messages and troubleshooting information.
Logging in
When the Command WorkStation has connected to the iR C2100/2100S,
the log in/out slider appears, prompting you to select a login level and enter a
password. Before you log in, the Administrator key is in the vertical position,
and the Operator and Guest keys are in the flat (horizontal) position. When
you click your login level, the corresponding key turns to the vertical
position.
For Administrator or Operator access to the iR C2100/2100S, click the
corresponding key, enter the password, and click Log in or press Enter. For
Guest access only, click the Guest key and then click Log in. No password is
required for Guest access.
If you change your mind about logging in, or do not have the password you
need, click Cancel.
When you have entered the appropriate password and logged in, the log in/
out slider retracts and the full Command WorkStation display appears. The
color of the key in the lock indicates your login level. If the iR C2100/2100S
is handling a large number of jobs, it may take a few moments to display the
entire job list.
Log in/out slider
