1
1-10 Operating the iR C2100/2100S
Accessing Setup menus
If you press the OPTIONS key during startup, the key shows solid green and
the message “Wait...” appears on the Touch Panel Display. If you want to
change the iR C2100/2100S Setup options, press the Yes key when the
message “Do you want to go to setup?” appears; then, press Run Setup when
the Start Up menu appears. iR C2100/2100S Setup is password protected if a
password has been set.
The top level of Setup has nine submenus: Server Setup, Network Setup,
Printer Setup, PS Setup, Color Setup, Job Log Setup, Change Password,
Clear Server, and Factory Defaults. Press the corresponding key to enter the
selected Setup menu; to leave Setup, select Exit Setup. For detailed
information about iR C2100/2100S Setup, see the Configuration Guide.
NOTE: Pressing Factory Defaults resets the iR C2100/2100S to its shipping
configuration; therefore, this menu should be used by your system
administrator only.
If you do not press Yes at the “Do you want to go to setup?” message, the
iR C2100/2100S continues with startup. When complete, the
iR C2100/2100S Info screen appears on the Touch Panel Display.
