A SERVICE OF

logo

AVT 200HD Tuner • Remote Configuration and Control 69
RS232 (shown below): From the drop-down menus, select the port, baud rate (the
default is 9600), parity, data bits, and stop bits.
Figure 39. RS232 Connection Tab
3. Click Connect. A Getting Device Settings screen displays status messages while the
software is opening.
Figure 40. Start-up Status Message Example
The AVT 200HD Configuration & Control Program main window appears with the
Control tab displayed (see the illustration on the next page). This tab shows the
currently selected channel or preset and also contains function selection buttons and
controls.