A SERVICE OF

logo

TW-H6W1IR ISDN Remote Router
120 Configuration and Management
? ? IP Address This is the IP Address of the device that the router
will attempt to reach. The router will check it routing table and try
to locate the IP Address.
? ? Count The number of pings (packets) that will be sent. A value of
0 will cause pings to be sent continuously.
? ? Delay (10ms) – The amount of time in 10 millisecond intervals
between each ping in the Count.
? ? Start Ping Test - Press <Enter> or <Return> to begin the test.
Loopback Test
The loopback test is used to test the path ISDN network between your
phone company’s switch and the router.