TW-H6W1IR ISDN Remote Router
62 Configuration and
Management
Dynamic IP Pool
The dynamic IP pool screen shown below contains the parameters that
the router can set on the hosts. Please note that the Dynamic IP Pool
cannot be enabled when the DHCP Agent feature is enabled.
The parameters are described below:
?? IP Address – this is the base (starting) address for the IP pool of
IP addresses to be assigned.
?? Range – this is the range of contiguous, IP addresses, above the
base IP Address above. In the above example, the IP addresses
assigned host computers as they come onto the network would be
202.93.47.1, 202.93.47.2 … 202.93.47.100.
?? Netmask – this mask informs the client, how the destination IP
address is to be divided into network, subnet and host parts. The
netmask has ones in the bit positions in the 32-bit address which
