TW-H6W1IR ISDN Remote Router
12 Installation
PHONE – 1— Lights up when standard phone port 1 is in use.
PHONE – 2— Lights up when standard phone port 2 is in use.
The TW-H6W1IR Rear Panel
POWER — This socket is an 18 volt, 750mA power input jack. If the
power adapter included with the router has been lost or misplaced,
please ensure that the replacement adapter meets both the voltage and
amperage requirements.
CONSOLE – This 9-pin RS-232 port is used for connecting a console
or PC running a terminal emulation program. It provides out-of-band
management capabilities for the initial setup and configuration of the
router.
PHONE 1 and 2 – These normal telephone jacks can be used to
connect telephones or fax machines to the router for use over the ISDN
lines. Plug telephone devices into these jacks as you normally would
into a telephone wall socket.
ISDN – This socket is used to connect the ISDN line to either an NT-
1 or directly to the ISDN wall jack, depending on the type of service
delivered by your phone company.
ETHERNET – The six Ethernet ports function as a normal 10 Mbps
10BASE-T Ethernet hub.
