TW-H6W1IR ISDN Remote Router
46 Configuration and
Management
as the corresponding Community String, in the Management
Station’s trap manager software, is the same.
?? State – this validates or invalidates the use of the SNMP
Community String, by setting the use of the string to Valid or
Invalid. Note that setting the string to Invalid is the same as
removing the string, however, the string remains so as to be
validated again at an appropriate time.
SNMP Authenticated Trap
Returning to the SNMP Agent Configuration menu, you can ‘Enable’
or ‘Disable’ an authentication failure trap message being sent to the
Management Station by the router. When an SNMP packet with an
invalid community name is received, it will be dropped. If this parameter
is enabled, a trap will be sent to the network manager; if this parameter
is disabled, no trap will be sent.
