TW-H6W1IR ISDN Remote Router
56 Configuration and
Management
The parameters in the above window are described as follows:
?? Name – the maximum length is 64 characters. This username is for
password challenges (authentication). The user dialing in must
supply this username in order to be allowed access to the router.
?? Password – this is the password associated with the above Name
field.
?? Rem CLID – Remote Caller ID. This is the telephone number of
the Remote User and is used for security. When a phone number is
entered in this field, the router will make sure that the incoming call
is coming from the same phone number as the one defined here. In
other words, the remote user can only be calling from the telephone
number defined here, otherwise the call will not be accepted. This
function is disabled if the field is left blank.
?? Default IP – this is the IP address that will be assigned to the dial-
in user when the IP Address Supply setting below is set to Default.
