TW-H6W1IR ISDN Remote Router
Installation 23
1. The LAN port must be enabled in the Interface
Configuration sub-menu.
? ?Choose Interface Configuration, LAN.
? ?Position the cursor over the State item and press <space
bar>. The State will change from Disable to Enable.
? ?Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
? ?Choose Exit in the sub-menus to return to the Main Menu.
2. Enable IP Networking
? ? Choose Network Configuration, IP
Configuration.
? ? Position the cursor over the last item IP Networking
and press <space bar> to Enable it.
? ? Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
3. Assign an IP address to the LAN port in the Network
Configuration sub-menu of the Main Menu.
? ?Still in Network Configuration, IP
Configuration submenu from Step 2 above, choose IP
Stack Configuration, LAN.
? ?Enter a valid IP address for the LAN in the first item. You may
also enter a Netmask if you wish. For more information about IP
