TW-H6W1IR ISDN Remote Router
86 Configuration and
Management
hitting ENTER (in the window shown above, this corresponds to the
field ‘Branch1’). After configuring the NAT options in the Name field,
you must save the changes, EXIT, and position the cursor over the
NAT IP Pool to configure variables there.
Name Field Configuration Screen
The configuration screen for the name field appears as follows:
The parameters are described as follows:
?? Name – this is a 12 character, alphanumeric, user-defined name,
used to identify the network address translation.
?? Global Interface – this is the interface corresponding to the
Global IP and Range parameters, in the NAT table, to form
unique IP address[es], known to the outside (regional or Internet)
routers, on this interface.
