TW-H6W1IR ISDN Remote Router
Configuration and Management 73
A company has 625 users (computers) all connected to one physical
network using Ethernet. However, the company only has one Class C
IP network address, 202.100.160.0. This network address will only
support 254 users. To solve the shortage of IP address problem and to
plan for future growth, the company applies for and receives two more
Class C IP network addresses, 203.101.161.0 and 204.102.162.0.
This gives the company a total of 254 x 3 = 762 IP Addresses, which it
assigns to the computer users, with a few left over for future needs. Due
to the nature of IP networks, however, the users in one IP network
domain (202.100.160.0, for example) cannot communicate with users
on a different IP domain (203.101.161.0). Multiple home solves this
problem. When you register the additional IP network addresses in the
Multiple Home Configuration menu on the router, the router will route
data between the three IP networks using the single LAN.
In this router, multiple home configurations only apply to the LAN
interface.
The parameters are described below:
