TW-H6W1IR ISDN Remote Router
Configuration and Management 65
Items are described as follows:
?? DHCP Server IP Address – this is the IP address of the remote
DHCP server. When a local computer powers up and sends a
DHCP request for an IP address, the TW-H6W1IR will forward
the request to the address specified here.
?? Time Threshold – this specifies the maximum amount of time (in
seconds) since the host began requesting an IP address. If the value
define here is exceeded, the relay agent will not pass along the
request from the host.
?? State – enables/disables the DHCP Relay Agent function.
Filter Configuration
Your TW-H6W1IR uses filters (configurable at two layers) to screen
packet data, and apply a routing decision. There are two methods for
configuring filters: you can configure a filter at the network layer (IP
filter) to restrict access between networks and reduce unnecessary
