TW-H6W1IR ISDN Remote Router
14 Installation
forwarded to the phone number entered. Press #77# to cancel call
forwarding.
? ? Three-person conference call – To use this feature, conference
calling must be enabled by the telephone company. After this is
done, pick up a phone and place a call. After connected, press
Flash 0 (refer to call waiting in the Interface Configuration –
ISDN Sub-menu section of this manual) and dial the second
number. After connected, press flash 3 to speak to both parties at
the same time. Press Flash 0 to hang up with the first party called.
Press flash 1 to hang up with the second party called.
? ? Call transfer – To transfer a call to the other phone jack on the
router: if using Phone 1, press flash 20. If using Phone 2, press flash
10.
Installation and Initial Configuration
This section discusses the different connections that can be made to the
router when setting it up.
Initially, you will only wish to connect the console to the router in order
to configure the other ports. Once that is complete, you will need to
turn off the power to the router and plug in the connection cables to the
other devices. Next, power on the other devices. When they have
finished powering up, power on the router. Each of these steps is
described in detail in the sections below. Please skip any setting
adjustments that do not apply to your configuration needs.
