TW-H6W1IR ISDN Remote Router
Using RADIUS Authentication 137
#-----------------------------
192.168.0.1 ALL_customer
should be added to the client file. The Client Name field in the file
gives the IP address of the TW-H6W1IR, and the Key field should be
the same as the Key field in the Radius Configuration submenu.
After a RADIUS server has been configured, the TW-H6W1IR will
use it to authenticate all users instead of checking it’s internal Dial-Up
User Profile.
Adding Users to the RADIUS Database
The TW-H6W1IR only uses the RADIUS database for user
authentication. Except for the User Name, Password and
Framed_IP_Address fields, most standard RADIUS attribute
fields are ignored by the TW-H6W1IR.
To add a user to the RADIUS database, edit the users file in the
RADIUS server’s /etc/raddb directory, and add a line similar to
the following:
joeuser Password = “joepassword”
Each user should have a user name/password record in the Users
database. It is also possible to configure an IP address for each user by
adding a line in the Users database similar to the following:
Ip user Password = “iusespecificip”,
Framed_IP_Address = 192.168.0.117
