Filter
Top Products
Page A-7APPENDIX A — INTERFACING XEROX PRINTERS
In the example above, the first and second Form Feeds were not sent to the
printer, because Auto FF suppression was initiated by the s+Pd job
beginning. The second s+Pd was translated into a Form Feed. This
means the second page is actually part of the same job as the first page.
The s +Xd ended auto FF suppression mode and the job. The last
Form Feed was passed because auto FF suppression had ended.
Input to OPTIMA: Output from OPTIMA:
s+Pds+Pd
...(commands and text)... ...(commands and text)...
<FF> (inserted by System) (Form Feed is removed)
...(commands and text)... ...(commands and text)...
s+Xds+Xd
s+Pds+Pd
...(commands and text)... ...(commands and text)...
<FF> (inserted by System) (Form Feed is removed)
...(commands and text)... ...(commands and text)...
s+Xds+Xd
<FF> <FF>
This example shows that the job start command is translated to a Form
Feed only when there is already an active job.
Input to OPTIMA: Output from OPTIMA:
s+Pds+Pd
...(commands and text)... ...(commands and text)...
<FF> (inserted by System) (Form Feed is removed)
...( commands and text)... ...(commands and text)...
s+Mds+Md
...(commands and text)... ...(commands and text)...
<FF> (inserted by System) (Form Feed is removed)
...(commands and text)... ...(commands and text)...
s+Xds+Xd
<FF> <FF>