Filter
Top Products
AGILE 5250 OPTIMA User’s Guide and ReferencePage B-4
Command: Superscript (SPS)
Format: 09
Printers: 3812, 5219
Action: Causes the current print position to move up one-half
line distance.
On the 5219, only one level of superscript is supported.
On the 3812, multiple levels of superscript are supported.
IBMEMUL: Same as the 3812. The PFS SUPS ON> is sent to the
printer once for each superscript level. A superscript
command received after a subscript command (to restore
the normal baseline position) causes the PFS SUPSOFF>
to be sent to the printer once per level.
The use of subscript ON/OFF and superscript ON/OFF
printer commands inthe SUPS ON>, SUPSOFF>,
SUBS ON> and SUBSOFF> PFSs will allow only one
level of sub/superscripting, because the target printer is
performing the sub/superscript, and it will support only a
single level.
The use of relative upward/downward movement
commands for the PFSs SUPS ON>, SUPSOFF>, SUBS
ON> and SUBSOFF> will allow multiple sub/superscript
levels to be supported.
275EMUL: No operation.
Command: Repeat (RPT)
Format: 0A
Printers: 3812, 5219
Action: No operation is performed; no character is printed.
IBMEMUL: No operation.
275EMUL: No operation.