Filter
Top Products
Page B-43APPENDIX B — SCS/DCA COMMAND SUMMARY
Command: Subscript (SPS)
Format: 38
Printer: 3812, 5219
Action: Causes the current print position to move down one-half
line distance.
On the 5219, only one level of superscript is supported.
On the 3812, multiple levels of superscript are supported.
IBMEMUL: Same as the 3812.
The PFS SUBS ON> is sent to the printer once for each
subscript level. A subscript command received after a
superscript command (to restore the normal baseline
position) causes the PFS SUBSOFF> to be sent to the
printer once per level.
The use of subscript ON/OFF and superscript ON/OFF
printer commands in the SUPS ON>, SUPSOFF>,
SUBS ON> and SUBSOFF> PFSs will allow only one
level of sub/superscripting, because the target printer is
performing the sub/superscript, and it will support only a
single level.
The use of relative upward/downward movement
commands for the PFSs SUPS ON>, SUPSOFF>, SUBS
ON> and SUBSOFF> will allow multiple sub/superscript
levels to be supported.
275EMUL: No operation.
Command: Indent Tab (IT)
Format: 39
Printers: 3812, 5219
Action: Moves the print position to the right one Tab stop and
sets the effective left margin to this position. If no Tab
stop is encountered, it will move the print position one
Space to the right.
IBMEMUL: Same as IBM.
275EMUL: No operation.