Filter
Top Products
AGILE 5250 OPTIMA User’s Guide and ReferencePage B-16
If the current orientation is either portrait or landscape,
then the font selection process has two steps. First, one of
the following PFSs is sent to the target printer (in this
order of priority):
Orientation PFS Condition
Portrait P PSCPI> ps = 02h
Portrait P 5CPI> CPI = 5
Portrait P 8CPI> CPI = 8
Portrait P 10CPI> CPI = 10
Portrait P 15CPI> CPI = 15
Portrait P 16CPI> CPI = 16
Portrait P 17CPI> CPI = 17
Landscape L PSCPI> ps = 02h
Landscape L 5CPI> CPI = 5
Landscape L 8CPI> CPI = 8
Landscape L 10CPI> CPI = 10
Landscape L 15CPI> CPI = 15
Landscape L 16CPI> CPI = 16
Landscape L 17CPI> CPI = 17
Next, the OPTIMA looks up the GFID in the font
correspondence table for the orientation (PORT ID> or
LAND ID>). If there is an entry for the requested GFID,
the corresponding PFS is sent to the printer to select the
font.
If there is no entry in the font table for the requested CPI,
or if the font selected by the PFS for the GFID is not
available at the target printer, then the target printers
spacing will still be correct because of the CPI PFS.
275EMUL: No operation.