Filter
Top Products
Page B-19APPENDIX B — SCS/DCA COMMAND SUMMARY
Command: Set Line Spacing (SLS)
Format: 2B D2 nn 09 ls
Printers: 3812, 5219
Action: Specifies the line spacing to be used for subsequent text.
The ls parameter specifies the number of half-lines to
space. The distance of a full line is determined by the
value most recently set either by the Set Line Density
(SLD) command or by the Set Single Line Distance
(SSLD) command.
IBMEMUL: Same as IBM.
The OPTIMA uses the ls parameter in calculating
vertical movement commands (the PFS VERMOVE>) to
send to the target printer. See Set Line Density (SLD)
and Set Single Line Distance (SSLD) for more
information.
275EMUL: No operation.