Filter
Top Products
8. Advanced Settings
5. Press ENTER to select.
The black balance menu will be displayed. (menu 8-23)
6. Select Black level red and adjust the red balance with the cursor keys until the red noise becomes visible in the black areas.
7. Select now Black level blue and adjust the blue balance with the cursor keys until the blue noise becomes visible in black areas.
8. Increase the brightness until the black areas displays approximately 50% white noise.
9. Correct Red and Blue Black balance adjustment in such a way the blue and red noise are just visible and a small brightness
increase maintain a grey color.
Advanced settings
Aspect Ratio
Position
PiP Configuration
Blanking
Input Balance
Back
Menu 8-21
Input balance
White balance
Black balance
Factory settings
Back
Menu 8-22
Black balance
Black level red
Black level blue
Back
Menu 8-23
Checking the white balance
There is no adjustment procedure for the white balance.
8.6.4 Returning to the factory defaults
Howtoreturn?
1. Push the cursor key ↑ or ↓ to highlight F actory settings. (menu 8-24)
2. Press ENTER to select.
The factory settings will be loaded.
Input balance
White balance
Black balance
Factory settings
Back
Menu 8-24
R5976763 CINEVERSUM 60/70 22042004 55