Filter
Top Products
10. Service menus
9. Enter in the same way.
10.Press ENTER to accept this third character.
The new password is entered.
It becomes valid after a reboot of the projector. Switch off the projector and switch on again.
Service
Identification
Password
IR address : 000
RS232 address : 000
Serial communication
Thermal diagnosis
I2C diagnosis
Back
Menu 10-7
Password
Use password : Yes
Modify password
Back
Menu 10-8
Modify password
Enter new value :
0
Menu 10-9
10.5 IR address
Overview
An overview of the IR address is given.
To change the IR address, see "Projector Address", page 29.
10.6 RS232 address
How to change ?
1. Push the cursor key ↑ or ↓ to highlight RS232 address. (menu 10-10)
2. Press ENTER to toggle between 000 and 001.
Service
Identification
Password
IR address : 000
RS232 address : 000
Serial communication
Thermal diagnosis
I2C diagnosis
Back
Menu 10-10
10.7 Serial communication
Overview
• Baudrate setup
• Serial communication interface selection
10.7.1 Baudrate setup
About Baudrate
The baudrate is the communications speed used for communication between the projector and the external computer. The baudrate
setting of the projector must be the same as those of the computer.
74
R5976763 CINEVERSUM 60/70 22042004