Barco 60 Projection Television User Manual


 
9. Installation menu
9.3.2 Reset a single input
What can be done ?
Via Image settings and Advanced settings the image can be modified as desired. But when some misalignments are discovered,
it sometimes not so easy to return to the standard settings. Therefore, with a Reset a sing le input,itispossibletoreturntosource
factory defaults.
How to reset a single input ?
1. Push the cursor key or to highlight Input slots. (menu 9-5)
2. Press ENTER to select.
The input slots menu will be displayed. (menu 9-6)
3. Push the cursor key or to highlight the input slot which must be reset. (e.g. Video)
4. Press ENTER to select.
The specific reset menu will be displayed. (menu 9-7)
5. Push the cursor key or to select the corresponding source type. (e.g. PAL source).
6. Press ENTER to reset.
If the selected source corresponds with the input signal, the projector will load the source default.
If the selected source does not correspond, nothing will happen.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-5
Input slots
5 RCA
YUV
Reset single slot
PC
RGB/Component
DVI
SVideo
Video
Component
Reset all slots
All input slots
Back
Menu 9-6
Video slots defaults
Reset PAL
Reset SECAM
Reset NTSC
Reset PAL non intl
Reset NTSC non intl
Back
Menu 9-7
The reset be executed without confirmation warning.
9.3.3 Reset all inputs
What can be done ?
All settings of all inputs can be reset to the default values.
How to reset all inputs ?
1. Push the cursor key or to highlight Input slots. (menu 9-8)
2. Press ENTER to select.
The input slots menu will be displayed. (menu 9-9)
3. Push the cursor key or to highlight All input slots.
All input will be reset to the default values.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-8
Input slots
5 RCA
YUV
Reset single slot
PC
RGB/Component
DVI
SVideo
Video
Component
Reset all slots
All input s
lots
Back
Menu 9-9
R5976763 CINEVERSUM 60/70 22042004 59