Filter
Top Products
The On-Screen Display (OSD) menu
29
Adding a channel in the sequential channel list
1. From the Setup menu, press or to select Manual installation and then press OK.
2. Press or to select CH No, and then press OK.
3. Pressorto select the sequential channel list position of the channel you wish to add, and
then press OK.
4. Press to select CH skip, and then press OK.
5. Press or to select Added, and then press OK.
6. You can stay in this menu to add other channel positions. To add another channel, repeat this
procedure from step 2 above.
When you’re finished, press MENU twice to close the OSD menu.
Swapping channels in the sequential channel list
1. From the Setup menu, press or to select CH swap and then press OK.
2. The sequential channel list will display on-screen. Press , , orto select the channel
you wish to move, and then press OK.
Channel swapping is much easier after you have provided a name for the channels you wish to
retain in the sequential channel list. See "Naming a channel" on page 28.
3. Press , , orto select a new position for the channel, and then press OK. The channels
details will be swapped with each other.
4. You can stay in this menu to swap other channel positions. To swap other channels, repeat
this procedure from step 2 above.
When you’re finished, press MENU thrice to close the OSD menu.
Downloaded From TV-Manual.com Manuals