Filter
Top Products
Section 1: Quick Start Guide
3
4. Connect the power cable
1. Locate the power cable from the packaging, unwrap it, and plug the appropriate end into the
'AC INPUT' socket on the rear of the TV (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, and switch it on (if switched).
• The type of power cable plug and socket illustrated may differ from that used in your region.
• Only use an appropriate power cable for your region. Never use a power cable which appears
damaged or frayed. Never change the plug type on a power cable. Be aware of total loading
when using extension cords or multiple outlet power boards.
WARNING:
This BenQ LCD screen TV has been engineered and manufactured with the highest priority on
safety, however, IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD. Please handle this TV with care. If damaged, turn off the power and
unplug the power cable from the TV. Transport the TV to your nearest BenQ authorised service
centre for repair.
There are no user serviceable parts in this TV. Never unscrew or remove any covers. There are
dangerous voltages inside. Turn off the power and uplug the power cable before moving the TV.
3. Turn on the main power switch on the TV as
illustrated. The TV will enter standby mode and
the power indicator (on the front lower center)
will light up red.
Power cable
Power
outlet
Downloaded From TV-Manual.com Manuals