Filter
Top Products
14 en | Introduction Divar XF
F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems
– Support for up to eight IP cameras (optional)
– Simultaneous recording and playback
– Internal hard disk video storage (front replaceable)
– On-board RAID4 (optional)
– 10/100Base-T Ethernet port for Ethernet connection and networking
– Two RS232 serial ports for serial communication
– External KBD keyboard input
– Dual monitor outputs
– Full-screen and various multiscreen display capabilities in live and playback modes
– Spot monitor output with sequencing, multiscreen, and OSD
– Two audio outputs (dual mono)
– Motion detection
– 8 or 16 switching (alarm) inputs and 4 alarm outputs
– Video loss detection
– Audible alarm
– Pan, tilt, and zoom camera control via RS485 and biphase
– Local archiving via USB
– Local archiving via built-in DVD burner (optional)
2.1.4 On-screen help
On-screen context-sensitive help is available for some topics. Just press the help button
to see the help text associated with your current activity. Press the escape button
to exit help.
2.2 Unpacking
Check the package for visible damage. If any items appear to have been damaged in shipment,
notify the shipping company. Unpack carefully. This is electronic equipment and should be
handled with care to prevent damage to the unit. Do not attempt to use the unit if any
components are damaged. If any items are missing, notify your customer service
representative or Bosch Security Systems sales representative. The shipping carton is the
safest container in which to transport the unit. Save it and all packing materials for future use.
If the unit must be returned, use the original packing materials.
2.2.1 Package contents
Check for the following items:
– Digital Video Recorder (Divar XF 16 or Divar XF 8 unit)
–USB mouse
– Quick installation guide
– Divar XF operation manual
– Divar XF Control Center and Archive Player operation manual
– Installation manual (this manual)
– A 25-pin D-type switching and alarm connector board
– A 15-pin D-type connector board (used for Biphase PTZ connections)
– A 3-pin screw terminal connector (used for RS485 PTZ connection)
– Power supply cord
– Shielded network cross-over cable (for service and testing purposes)
– Rack mounting kit
– A CD-ROM containing the software and manuals