Bosch Appliances XF DVR User Manual


 
80 en | Menu default values Divar XF
F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems
Contacts Contact Inputs NC None Y
Relay Outputs NC None Y
1..24 Contact input name Contact input
1..24
Y
Profile override mode No override Y
Profile Profile 1 Y
Duration 1 hour Y
Motion 1..16 Trigger level 50% Y
Motion areas All clear Y
Event Profile 1-6 General Auto acknowledge
alarms
Disabled Y
Alarm dwell time 10 seconds Y
Beep on alarm Enabled Y
Beep on video loss Enabled Y
Actions when entering
profile
No actions Y
Contact 1...24 Enabled 1..16 enabled Y
Alarm Disabled Y
Actions Apply recording
for NShow on
Mon A
Y
Motion 1...24 Enabled 1..16 Y
Alarm Disabled Y
Actions Apply recording
for NShow on
Mon A
Video loss 1...24 Enabled 1..16 enabled Y
Network Setup DVR Name DIVAR XF N
Discovery Enabled N
DHCP Enabled N
IP address 0.0.0.0 N
Subnet mask 0.0.0.0 N
Default gateway 0.0.0.0 N
HTTP port 80 N
Bandwidth limit 100Mbps N
IP range Begin address 0.0.0.0 N
End address 255.255.255.25
5
N
Monitor streaming Input 1..16 Camera input Y
Storage Status NA
Settings Override after Disk full set Y
Service NA
Table 8.3 Configuration menu default values
Navigation Setting Default value Reset