Filter
Top Products
Divar XF Quick install | en 17
Bosch Security Systems Installation manual F.01U.135.429 | 2.5 | 2009.08
3 Quick install
To get the unit quickly operational, make the connections described below and then enter the
relevant data in the Quick install menu. The Quick install menu appears the first time the unit
is started. When the relevant information is entered, the unit will be operational.
3.1 Connections
Figure 3.1 Back panel connections
3.1.1 Primary connections
1. Connect the cameras to the BNC camera inputs (automatically terminated).
2. Connect monitor A to the BNC, Y/C, or VGA (supporting 1280x1024) output MON A.
3. Connect (supplied) USB mouse to a USB port.
3.1.2 Optional connections
4. Connect monitor B to the BNC, Y/C, or VGA (supporting 1024x768) output MON B.
5. Connect up to 16 audio signals to the RCA audio inputs.
6. Connect the RCA audio output(s) to the monitor or an audio amplifier.
7. Connect up to 16 (alarm) inputs (via the supplied 25-pin D-type connector board).
8. Connect up to 4 alarm outputs (via the supplied 25-pin D-type connector board).
9. Connect the malfunction output (via the supplied screw terminal adapter).
10. Connect an Intuikey keyboard to the KBD In socket and connect the terminator (supplied
with the keyboard) to the KBD Out socket.
11. Connect a Bosch pan/tilt/zoom control unit to the Biphase port (via the supplied 15-pole
D-type connector board).
12. Connect a third-party pan/tilt/zoom control unit to the RS485 port (via the supplied
screw terminal adapter).
13. Connect to your network via the Ethernet port.
3.1.3 Powering up
Switch on all connected equipment.
14. Connect the power cord to the unit.
KBD in
KBD out
IR ext
VGA
CVBS Y/C
Biphase
Com 1 Com 2
Alarm I/O
A
B
AA
BB
- | + | G
RS
485
MAL
OUT
N0 | C | NC
Video in
Video out
Video in
Video out
Video in
Video out
1234
1234
5678
5678
9101112 13141516
9101112 13141516
AC
USBUSB
Ethernet
Audio out Audio in
AB
L
R
13579111315
2 4 6 8 10 12 14 16
Monitor out
x16*
AutoDome
LAN / WAN
USB
VIDEO
IN
VIDEO
IN
x16*
PC
1A
1B
2A
2B
R
E
L
A
Y
3A
3B
4A
4B
GND
1
2
GND
9
10
3
4
GND
11
12
5
6
GND
13
14
7
8
15
16
IN
IN
IN
IN
+
-
SHIELD
CTRL 1
SHIELD
+
-
SHIELD
CTRL 2
+
-
SHIELD
CTRL 3
+
-
SHIELD
CTRL 4
+
-
SHIELD
CTRL 5
110 - 240 VAC
RS485
A
PTZ
B
1
10
13
6
5
14
4
2
11
8
3
12
9
7