Filter
Top Products
Divar XF Operating instructions | en 51
Bosch Security Systems Installation manual F.01U.135.429 | 2.5 | 2009.08
5.10.1 Alarms
An alarm can cause the unit to react as follows:
– A beeper sounds.
– A status message is displayed.
– An alarm icon is displayed.
– The border around a cameo changes color to red.
– An alarm indicator, a motion indicator or a video loss indicator flashes.
– The indicator on the key flashes.
– An output relay is activated.
– The view modes on the monitors change.
– A controllable camera might be moved to a pre-defined position.
– Recording behavior changes.
– The unit changes the way it operates via pre-defined profiles.
Acknowledging an alarm
Press the acknowledge key to acknowledge the alarm.
– The beeper is silent.
– The alarm and indicators are no longer lit.
– The alarm status message disappears.
– The last-used view mode is restored.
The alarm icon remains visible as long as the input causing the alarm is active.
If an alarm is not acknowledged, the beeper switches off after the dwell time but the alarm
still needs to be acknowledged.
If auto-acknowledge is enabled, the beeper and the alarm and indicators,
switch off after the dwell time.