Filter
Top Products
Divar XF Hardware setup | en 27
Bosch Security Systems Installation manual F.01U.135.429 | 2.5 | 2009.08
Specifications
Output signal: VGA
Resolution: 1280 x 1024 (monitor A), 1024 X 768 (monitor B)
Color: True color (32 bit)
Connector type: DE-15
Figure 4.8 VGA monitor connectors
4.6.2 CVBS
Connect the unit to CCTV monitors using 75 ohm video coaxial cables with BNC connectors.
The unit provides a 1 Vpp CVBS signal.
If the monitor has a loop-through connection and you are not using the loop-through output,
then select the 75 ohm impedance setting on the monitor. If the monitor's loop-through
output is connected to an additional device, the device's termination is set to 75 ohm and the
monitor's termination is set to high impedance. (Note that this is not necessary on devices
with automatic termination.)
Specifications
Output signal: Composite video 1Vpp, 75 ohm, Sync. 0.3Vpp ±10%
Resolution: 720 x 576 PAL, 720 X 484 NTSC
Connector type: BNC
Figure 4.9 CVBS monitor connectors
4.6.3 Y/C
Connect the unit to a CCTV monitor with Y/C input, using a standard Y/C connection cable.
Figure 4.10 Y/C monitor connectors
4.7 Monitor streaming connection
To connect a monitor in a remote streaming configuration, connect the CVBS monitor output
to a video input. Then connect the monitor to the corresponding loop-through connector.
VGA
A
B
CVBS
A
B
Y/C
A
B