Filter
Top Products
50 en | Operating instructions Divar XF
F.01U.135.429 | 2.5 | 2009.08 Installation manual Bosch Security Systems
Figure 5.15 Logbook menu - Logbook filter
– Enter start and end times.
– Make a selection of which system events to show.
– Logbook contents - shows the earliest and latest available log contents.
– Show - click to show the results.
Logbook results
Shows the Date, Time, and Event type of various system events. A video preview screen of the
selected event is shown, if applicable.
5.10 Event handling
Various types of events change the way the unit works. These events are:
– a contact input signal applied to the unit;
– motion detection in a camera signal;
– a loss of video from one of the cameras;
– an internal alert from the unit itself (i.e. disk failure, temperature alarm).
The way the unit reacts to events depends on how it is programmed.
An event can change the way the unit works and, if it is an alarm, can require a response from
the user.
Background events
Events can change background tasks that a user may not notice. Unit responses that are not
visible to the user are, for example, a change in recording speed, the activation of the output
relay, or event logging. The unit can also be configured to record upon the activation of an
event or it might change the way the camera images are displayed on the monitors without
requiring user intervention.