Filter
Top Products
APPENDIX C 141
These Touch-Tone Quick Commands can be dialed from a Local Extension or
an outside telephone at the Auto Attendant. To enter Command mode, dial
at a Local Extension or at the Auto Attendant. If you are requested to
enter a password, enter the Administrator password. Next, enter any
command followed by the sign.
Command Action
00 TalkSwitch tells you the Unit ID of the unit you are connected
to.
0x Assign Unit ID 1 - 4 to TalkSwitch (x = 1 to 4)
30 TalkSwitch tells you which mode it is currently using.
3x Switch Modes (x = 1 or 2)
4x Record Auto Attendant (x = 1 to 9)
04x Erase Auto Attendant messages (x = 1 to 9)
5x Playback Auto Attendant messages (x = 1 to 9)
61 - 64 Record Auto Call Back Announced Messages 1 - 4
65 Record Prompted Call Back Announced Message
061 - 064 Erase Call Back Announced Messages 1 - 4
065 Erase Prompted Call Back Announced Message
71 - 74 Playback Auto Call Back Announced Messages 1 - 4
75 Playback Prompted Call Back Announced Message
90 Set to Serial connection mode (default)
91 Set to USB connection mode
2xx 8<phone
number>
Enter Remote ext. (2xx) phone number
2xx 980 0 Enter Remote ext. (2xx) Turn off “Same Line Connect”
#
#
APPENDIX C
QUICK COMMANDS
AND TOUCH-TONE FUNCTIONS