Filter
Top Products
TALKSWITCH CONFIGURATION 71
important to remember that a small initial long distance charge is
incurred at your current location when you activate Prompted Call
Back.
2.3.6.1 Auto Call Back
TalkSwitch‘s Call Back/DISA features gives you access to your office-based long
distance savings plan from
anywhere around the world.
You can configure four Auto Call Back numbers. Select an Auto Call Back 1–4.
Click the check box next to ‘Activate Auto Call Back x’ (x represents a number
from 1 to 4).
Number to call back:
Enter the Call Back number exactly as you would normally dial the number
(i.e. do not enter a line Hunt Group in the dialing string).
Use dialing prefix:
If you have to dial the same prefix every time when using Auto Call Back
(i.e. long distance calling card number), enable ‘Use dialing prefix’. Enter
the dialing prefix including any required pauses or feature keys like
or . Use a comma to insert a 2-second pause. For example, if you want
to disable Call Waiting and want to dial a long distance prefix before
dialing the long distance number, enter the following:
Note: Prompted Call Back is not activated in the TalkSwitch configuration
by default. You need to activate Prompted Call Back before you can use
the feature. The Call Back out of the system to the number programmed
always uses the same line that was dialed.
*
#