Filter
Top Products
72 TALKSWITCH USER GUIDE • UK & IRELAND
*70,1010555,, This corresponds to 70 for disabling the Call Waiting
feature, a 2 second pause to wait for the new dial tone, 1010555 for the
long distance prefix, and a 4 second pause to wait for the new dial tone
before dialing the long distance phone number.
Number used to trigger Auto Call Back:
Select the line/phone number that you dial when out of the office to
trigger Auto Call Back. TalkSwitch initiates the Call Back using the same
line you initially called. You can make configuration changes to Auto Call
Back by dialing into this phone number only.
Use Password on Call Back:
The password option is designed to give you security and to restrict the
use of this particular Call Back number. Enter a 4- to 8-digit password for
the Call Back. When TalkSwitch calls you back, you are prompted for the
password to accept Call Back.
Use Announced Message:
We recommend this option if the number TalkSwitch calls back is to a
hotel or a location where a third party answers the call. The Announced
Message option allows you to record a message that plays when the call is
initially answered during a Call Back. For example, “Please transfer this
call to Bob in room 307”. The Announced Message can be recorded locally
using an extension handset or remotely by accessing Call Back from the
Auto Attendant. The Record message button gives the instructions as
follows:
Pick up a telephone handset connected to the TalkSwitch and use the
following keypad commands to record the specific Auto Call Back
Announced Message:
1. Press to enter command mode. Enter the password if required.
2. Enter the appropriate command as listed below. After each command,
press to confirm the entry.
Auto Call Back Recording Playback
16171
26272
36373
46474
*
#
#