Filter
Top Products
Reference
116
Troubleshooting Tables
TROUBLESHOOTING TABLES
Use these tables if you have problems using the system. Look in this section for a
description of the problem before calling the Customer Service Center. Many problems
arise from basic misunderstandings of how the system works, especially when you are
just becoming familiar with it. These tables cover many problems, usually with a simple
solution for each one. To solve a particular problem, do the following:
1 Review the section in this Guide that relates to the problem.
2 If you cannot find a solution, then find the section in the following tables that relates to the
problem.
• Read the What’s Happening column until you find the problem.
• Read the information in the Possible Reason column.
• Try each of the suggested solutions in the What to Do column.
3 Sometimes resetting the receiver can fix a minor problem. See Resetting Your Receiver
on 116.
4 Make sure your TV is tuned to the correct channel or input. Use RECOVER as described
on 56.
5 Make sure your remote control has fresh batteries. If you see the Remote Battery Low
warning on your TV screen, it’s time to change the batteries. Follow the instructions on
page 28.
6 Make sure your receiver is connected to an active telephone line. See the instructions on
page 38.
7 Check for anything that might be blocking the satellite signal (for example, tree branches,
snow, etc.).
8 For more information, call the Customer Service Center at 1-800-333-DISH (3474), or see
www.dishnetwork.com.
Note: Before calling the Customer Service Center, have ready the date of purchase and
either your customer account number, the receiver conditional access number, or the
receiver model number. Display the System Information screen to find these numbers
(See Ordering your Programming). Also, write down any error messages that the receiver
displays on the television screen.
Reference Two Color.fm Page 116 Friday, December 16, 2005 2:41 PM