Filter
Top Products
Chapter 11
94
Scheduling Receiver Updates
SCHEDULING RECEIVER UPDATES
The receiver comes scheduled to update the Program Guide at 3:00 am every day. This
section describes how to change the Updates settings. Keep this feature enabled so that
your DVR Events and DISH Pass Timers remain current.
Note: This feature does not interfere with scheduled timers.
INACTIVITY STANDBY
If your receiver is on for a preset period of time without any activity (for example, no
channel changes), the Inactivity Standby feature turns off the receiver so that you’ll
always have the latest Program Guide and DISH On Demand (if available on your
model). Enabling this feature (recommended) also improves the reliability of your receiver.
To change the settings for this feature, complete the following:
1 Press the MENU.
2 Select Preferences (8), and then Inactivity Standby (9) to open the Inactivity Standby
screen.
3 Highlight Activation and use the UP and DOWN ARROW buttons to switch between
Enabled and Disabled.
4 Highlight Inactivity Duration and use the UP and DOWN ARROW buttons to select the
amount of time the receiver waits before turning off.
5 Select Done.
Note: Select Defaults to reset the changes you’ve made to this feature.
Chapter 11 Two Color.fm Page 94 Monday, December 19, 2005 1:02 PM