Filter
Top Products
Chapter 12
110
Connecting Off-Air Antenna
Peaking Your Off-Air Antenna
1 Press MENU, select System Setup (6), and then Local Channels (9) to open the Local
Channels screen.
2 Highlight the Channel field and use the UP and DOWN ARROWS to select a digital off-air
channel. Make sure you see a green signal strength bar and a Locked indication on the
meter.
3 Adjust the orientation of your antenna to maximize the signal strength. If you cannot get a
Locked indication, you may need to upgrade your antenna or relocate it to a better
position.
Using Local Satellite Channels
If you subscribe to the local satellite channels and want to see the them in the Program
Guide by broadcast number, enable the Sat Locals feature. Otherwise, the local satellite
channels will display in the four-digit channel range.
Note: Digital off-air channels display in the guide at the broadcast channel regardless of
the setting you choose here.
1 Press MENU, select System Setup (6), and then Local Channels (9).
2 Select Sat Locals.
3 Select Enable or Disable.
4 Select Done.
Chapter 12 Two Color.fm Page 110 Tuesday, December 20, 2005 2:12 PM