Dynex DX-26L100A13 Flat Panel Television User Manual


 
Turning on your TV for the first time
17
DX-26L100A13
3 Replace the battery cover.
Aiming the remote control
To aim the remote control:
Point the remote control towards the remote sensor
on the front of your TV.
Turning on your TV for the first
time
The first time you turn on your TV, the Setup Wizard opens.
The Setup Wizard guides you through setting up basic
settings including the menu language, date and time,
picture mode, and TV signal source.
To set up your TV:
1 Make sure that you have:
Installed the remote control batteries. (See
page 16 for details).
Connected an antenna, cable TV, or satellite TV.
(See page 8 to page 10 for details.)
Connected the power cord. (See page 8 for
details.)
2 Press (Power), then wait several seconds. The
Choose Your Menu Language screen opens.
3 Press or to highlight a language, then press
ENTER. The Choose Your Time Setting screen opens.
4 Press or to highlight Mode, then press or
to select Custom (to set the date and time
manually), or Auto (to set the date and time
automatically from a TV signal source, based on the
time zone you select).
5 If you selected Auto for mode, press or to
highlight Time Zone, then press
or to select
your time zone. Choices include Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland.
6 If you selected Auto for mode, press or to
highlight Daylight Savings Time, then press
or
to select On (if your viewing area observes Daylight
Savings Time), or Off (if your viewing area does not
observe Daylight Savings Time).
7 If you selected Custom for Mode, set the date by
pressing
or to highlight Year, Month, or Day,
then press or to change the setting.
8 If you selected Custom for Mode, set the time by
pressing
or to highlight Time, then press or
to highlight the hour, minute, or AM/PM.
9 Press or to adjust the setting.
Cautions
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Choose Your Menu Language
Español
Français
English
Setup Wizard
Set menu language to English,Français,Español
Next
Move Select Back
MENU
Exit
EXIT
Setup Wizard
If Automatic,options are automatically set by TV source
Next
Move Select Back
MENU
Exit
EXIT
AutoMode
Time
Day
Month
Year
Daylight Savings Time
cificaPenoZemiT
12 : 00 AM
01
01
2010
Choose your Time Setting
12-0204_DX-26L100A13 MAN_V1_EN.book Page 17 Monday, June 11, 2012 3:03 PM