Filter
Top Products
38
Programming universal remote controlsDX-26L100A13
Programming universal remote
controls
Programming a different universal
remote control
You can operate your Dynex TV with a new or existing
universal remote control.
To program a different universal remote control:
1 See the table below for common codes. If you have
problems programming your remote or need a
different remote control code, visit
www.dynexproducts.com/remotecodes for the
latest remote control code information.
2 Follow your universal remote control’s instructions
to enter the TV code you found in Step 1.
For additional help and information…
1. Visit http://www.dynexproducts.com/remotecodes
2. Call technical support for the universal remote control
or cable/satellite company of the remote/set-top box you
are trying to program.
3. Call the Dynex Customer Care Center 1-800-305-2204
Common universal remote control codes
The following is a list of the most common remote control
codes. Codes for other remote controls are available
online at: www.dynexproducts.com/remotecodes, or
check with your cable or satellite TV provide for the
remote control code.
Dynex TV codes for universal remote controls (for all
Dynex TVs manufactured after Jan. 1, 2007)
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply
within the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
Tips
• If your universal remote control has a code
search feature, run a code search to identify a
code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “Learn”
feature, you can manually program it using the
Dynex TV remote to “teach” the commands one
at a time. See your universal remote control’s
instructions for details.
Notes
• This note only goes with TV/Blu-ray or TVs.
• The following codes may not provide full
functionality. You may need to use the remote
control that came with your TV, especially to
control the Blu-ray or DVD functions.
Universal remote control makes and models
One for All 0054
Phillips 0198, 0490
RCA 135
Sony
068, 069, 078, 096, 100, 164,
168, 229, 026
Set-top box makes and models
Cablevision
068, 069, 078, 096, 100, 164,
168, 229, 026
Charter
2002, 1204, 1423, 1517, 0171,
1963, 0463, 1463, 0842, 1326,
167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast
10171, 11204, 11326, 11463,
11517, 11641, 11780, 11785,
11892, 11963, 12002
Cox 1326, 1463
DirectTV
10171, 11204, 11326, 11517,
11564, 11641, 11963, 12002
Dish Network 720
Time Warner
400, 450, 461, 456, 11463,
1463, 0463
TiVo 0091
Verizon 0198, 0490
Tips
• The brand name is often visible on the front of
the universal remote control, and the model
number is often visible on the back.
• If your universal remote control isn’t listed on
the chart, refer to your universal remote
control’s instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.
12-0204_DX-26L100A13 MAN_V1_EN.book Page 38 Monday, June 11, 2012 3:03 PM