Dynex DX-32L100A13 Flat Panel Television User Manual


 
10
Making connectionsDX-32L100A13
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the HDMI cable to the
HDMI1 jack on the side of your TV.
5 Connect a 3.5 mm audio cable (not provided) to the
PC AUDIO IN jack on the back of your TV and to the
AUDIO OUT jack on the cable or satellite box.
6 Turn on your TV, then turn on the cable or satellite
box.
Using component video (better)
To connect a cable or satellite box using component
video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to
the COMPONENT IN/Y, PB, PR jacks on the side of
your TV and to the component video out jacks on
the cable or satellite box.
4 Connect an audio cable (provided) to the L and R
audio jacks on the side of your TV and to the audio
out jack on the cable or satellite TV box.
5 Turn on your TV, then turn on the cable or satellite
box.
Note
A DVI device must be connected to the HDMI1 jack.
If you connect a DVI device to another HDMI jack, you
will not hear any audio.
HDMI cable with
HDMI-DVI adapter
3.5 mm audio cable
Cable or satellite box
Side of TV
75 ohm coaxial cable
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog. If your TV has a
digital audio jack (optical or coaxial), you can connect
the video to the component video jacks, then
connect a digital audio cable to receive digital audio.
Side of TV
Component video cable
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
75 ohm coaxial cable
12-0956_DX-32L100A13 MAN_V2_EN.book Page 10 Monday, September 24, 2012 10:39 AM