Filter
Top Products
Specifications
37
DX-32L100A13
Specifications
Specifications are subject to change without notice.
Warranty
Dimensions and weight
Screen
Display resolutions/VGA scan rates
Tuner
After Auto
Channel Search,
there are no
channels
• Reception can vary by channel depending on
the broadcast power level of a given station.
Contact your cable or satellite TV provider.
• Make sure the antenna or cable/satellite box is
connected securely to your TV.
• Try replacing the cable between the
antenna/cable or cable/satellite box and your
TV.
One or more
channels do not
display.
• Make sure that the channels are not blocked.
See “Setting parental control levels
” on
page 26.
• Make sure that the channels are not hidden.
The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. See
“Hiding channels
” on page 23.
• If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
• Make sure you have the correct input selected
to view channels from the cable or satellite
box.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital
signal strength” on page 25.
Password is lost. • Enter 9999 to access parental controls, then
set a new password. See “Setting or changing
the password” on page 25.
Some settings
cannot be
accessed.
• If a setting is grayed, the setting is not
available in the current video input mode.
TV cabinet creaks. • When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons
do not work
• Make sure that the Button Lock option is set
to No. See “Locking control buttons
” on
page 26.
• Unplug the power cord, wait a few seconds,
then plug the cord back in and turn on your
TV.
TV keeps turning
off
• Make sure that the sleep timer is not turned
on. See “Setting the sleep timer
” on page 30.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your TV, then
turn it on again.
Problem Solution
DX-32L100A13
Parts: 1 year
Labor: 1 year
DX-32L100A13
Without stand:
31.0 × 4.4 × 19.5 in.
(78.65 × 11.09 × 49.55 cm)
With stand:
31.0 × 9.1 × 21.5 in.
(78.65× 23.18 × 54.65 cm)
Without stand:
18.01 lbs. (8.2 kg)
With stand:
19.41 lbs. (8.6 kg)
DX-32L100A13
Screen size measured diagonally 31.5"
Display type LCD
Panel 60 Hz vs.120 Hz 60Hz
Display resolution 720p
Panel resolution 1366 (H) × 768 (V)
Aspect ratio 16:9
Contrast ratio (typical)–panel 3000:1
Dynamic contrast ratio - list value 6000:1
Brightness (center typical) cd/m2 300 nits
Comb filter 3d y/c digital
Response time 8 ms
Horizontal viewing angle 160
Vertical viewing angle 160
DX-32L100A13
HDMI 1.3 Suggested Resolutions:
1080p, 1080i, 720p,
480p, 480i
Component video Suggested Resolutions:
1080i, 720p, 480p, 480i
PC/VGA Suggested scan rates:
640×480/60Hz,
800×600/60Hz,
1024 × 768/60Hz,
1360 × 768/60Hz
DX-32L100A13
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
12-0956_DX-32L100A13 MAN_V2_EN.book Page 37 Monday, September 24, 2012 10:39 AM