Filter
Top Products
14
Introducing the R-44
fig.panel-3.eps
Control sync connector [CTRL SYNC]
You can perform clock-synchronized recording of up to 8 channels by connecting two R-44 units with a
mini-type stereo cable via the CTRL SYNC connectors. You can also remotely link recording standby, start,
and stop.
For details, refer to “Remotely linking two connected R-44 units” (p. 73).
* Remote linking does not guarantee that two R-44 units will start recording at the same time.
Digital output jack [DIGITAL OUT]
This connector outputs a digital signal. You can connect digital devices, such as speakers or mixers, with
an coaxial- type cable. This connector provides the same audio signal as the Headphone jack , but in
digital form.
(IEC 60958-3 compliant)
* The volume cannot be adjusted with the Monitor level knob .
Digital input jack [DIGITAL IN]
Connect a XLR type cable to this connector to record a digital signal. The digital input signal is recorded in stereo
on channels 1L and 1R. If you want to record in monaural, you must change the Rec Mode setting in the System
Settings menu. For details, refer to “1 Recording Setup” (p. 66). (IEC 60958-3 compliant)
Rubber Flap
Open this cover to expose the Memory card slot and USB connector.
Memory card slot [MEMORY CARD SLOT]
You can insert a SD memory card into this slot.
USB connector [USB]
You can connect the R-44 to your computer with the included USB cable and move or copy recorded
projects. You can also move or copy files from your computer to the SD memory card.
For details, refer to “Connecting to a computer” (p. 71).
Security Slot [ ]
You can attach a commercial available security wire to prevent theft to this slot.
http://www.kensington.com/
AC adaptor jack [DC IN]
You can connect either the included AC adaptor or a commercially available cable for an external power
device.
For details, refer to “Connecting the AC adaptor and turning the power on/off” (p. 24).
Side panel (left)
27
26
28
30
31
32
33
29
26
27
25
24
28
29
30
31
R-44_e_new.book 14 ページ ２００８年１月７日 月曜日 午後５時８分