Filter
Top Products
18
Introducing the R-44
The Main screen
The R-44 Main screen displays information about the project and the operational status of the R-44.
You can press the [DISP] button to change the contents of the display.
fig.play-disp.eps
Display
While playing or stopped
Project name
Displays the name of the project. The file name is shown when you copy WAV
files from your computer via USB to the R-44’s SD memory card. File names
containing double-byte characters (e.g., Japanese) are not displayed correctly,
but they can be played.
Time counter
Displays the time elapsed from the beginning of the project to the current po-
sition in hour:minute:second:1/100 second format.
Progress bar Displays the current playback location relative to the entire project.
Total time (LEN: Length) Displays the total time of the entire project.
Level scale dBFS Displays the sound level for each channel (after adjusting input levels) in real
time.
The markings are relative to 0 dBFS (Full Scale) of the digital signal. For exam-
ple, 12 indicates -12 dBFS. C is the clipping level (0 dBFS).
Clip level indicators
Channel level meters
Channel names
Displays up to four channel names. When using one stereo channel, 1L and
1R are shown. When using two stereo channels, 1L, 1R, 2L, and 2R are shown.
For monaural projects, 1, 2, 3, and/or 4 is shown according to the number of
channels.
When the sensitivity setting is too large and clipping occurs the display is
shown in inverted black and white.
Output assignments
Displays how the audio of each channel is assigned to the L/R output chan-
nels. means that the audio is output to the left channel, to the right
channel, and to both left and right channels. Channels that are not shown
are not output.
You can select a channel to be monitored by pressing the Monitor Level
knob. You can also restore the default settings by pressing and holding down
the Monitor Level knob for one second.
The output is sent to the PHONES jack, Line output jacks, and digital output
jack.
*When Output Sel (p. 69) in the system settings is set to “monitor,” the Line
output jacks output plays sound as set in the output assignments.
Sampling frequency Displays the sampling frequency and sample size (bit depth) of the currently
selected project.
Sample size (bit depth)
Status indication
Date and time
̄
Project name Progress bar Total time
Time counter
Level scale
dBFS
Channel
names
Output
assignments
Channel level
meters
Clip level indicators Monitor level meters
Sampling frequency
Sample size (bit depth)
Marker indicators
Clip level indicators
Power source
R-44_e_new.book 18 ページ ２００８年１月７日 月曜日 午後５時８分