Filter
Top Products
24
Getting ready to use the R-44
* Once the connections have been completed, turn on power to your various devices in the order specified. By turning
on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
* Reduce the volume before turning on power. Even when the volume is turned down, sound may be produced when
turning on the power. This is not a defect.
* If you connect the AC adaptor when batteries are installed, the power will be supplied from the AC adaptor.
932
* Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual
information faces downwards. The indicator will light when you plug the AC adaptor into an AC outlet.
Turning on the power
1
Insert the AC adaptor to the AC adaptor jack on the R-44 side panel (left).
* Use only the included AC adaptor.
2
Plug the AC adaptor into an AC power outlet.
3
To turn the power on, press and hold the R-44 [POWER] switch for about two seconds.
Wait until the Main screen appears.
942
* This unit is equipped with a protection circuit. A few seconds after power up is required before the unit operates
normally.
Turning off the power
1
Confirm that recording/playback has been stopped.
2
While the Main screen is displayed, press and hold the R-44 [POWER] switch for about 2 seconds to
turn the power off.
*923
* If there are batteries in the unit while an AC adaptor is being used, normal operation will continue should the line
voltage be interrupted (power blackout or power cord disconnection).
Connecting the AC adaptor and turning the power on/off
Indicator
R-44_e_new.book 24 ページ ２００８年１月７日 月曜日 午後５時８分