Filter
Top Products
21
Introducing the R-44
From the Main screen, press the [DISP] button twice to show the recording buffer capacity (BUF: buffer
gauge).
The recording buffer is memory that temporarily stores the input sound before it is written to the SD
memory card. The buffer gauge indicates how much of the recording buffer has been used. Normally, the
recording buffer never reaches capacity because input sound is immediately written to the SD memory
card. However, if the SD memory card processing capacity decreases and writing data to the SD memory
card is delayed, then the data may accumulate to an excess and the buffer may overflow. (The SD memory
card processing capacity may be affected if file arrangement on the disk becomes irregular due to project
files being repeatedly written and deleted.)
* When the recording buffer is close to capacity, the “SD buffering” message is displayed.
* When the recording buffer reaches capacity, the buffer gauge moves all the way to the right edge and the “SD Card
Slow!” message is shown. Recording does not stop even if the “SD Slow” message is displayed, but some sound is
not recorded. This message will not disappear until a button is pressed.
* The same message is displayed if the hard disk processing capacity is diminished and writing to the SD memory
card is delayed. For important recordings, we recommend formatting the SD memory card before use.
Remaining buffuer capacity
R-44_e_new.book 21 ページ ２００８年１月７日 月曜日 午後５時８分