Filter
Top Products
Manual Supplement
00809-0500-4530, Rev AA
October 2010
1-15
Rosemount 5300/5400 Series
To change the Modbus address and communication parameters in
Rosemount Radar Master (RRM):
1. Start RRM and connect to the transmitter.
2. In RRM, select Setup>General.
3. Select the Communication tab.
4. Click the Modbus Setup button.
5. In the Modbus Setup window, select Modbus protocol and type the
desired Modbus address.
6. Enter the baud rate, parity, and stop bits, then click the OK button.
It is also possible to enter a user-defined Modbus Message in the Modbus
String area.
See separate sections below for more details regarding each Modbus
protocol.
Modbus Setup