Filter
Top Products
Manual Supplement
00809-0500-4530, Rev AA
October 2010
1-33
Rosemount 5300/5400 Series
ScadaPack
Figure 1-14. Wiring Diagram for
Connecting 5300/5400 Modbus to
SCADAPack 32
Table 1-24. Parameter Values (in
case of SCADAPack 32)
The Input Register Base Number needs to be added to the Input Register
address of the 5300/5400 transmitter. In this case, register 1302 needs to
have 31303 entered as the address etc.
Kimray DACC 2000/3000 This table shows input types in Kimray IMI software and the corresponding
value. The communication port must be configured to use “Tank Levels”
protocol.
Table 1-25. Kimray Input Types and
Corresponding Values
RS-485 on COM1
1 +5 V
2 RX-
3 TX-
4 GND
5 RX+
6 TX+
7 Not Used
8 Not Used
SCADAPack32
MA
MB
POWER +
POWER -
5300/5400 Modbus
Power Supply
+ 8 to + 30 Vdc
(max. rating)
REF
Parameter Value
Baud Rate 9600
Floating Point Format Code 0
RTU Data Type Floating Point
Input Register Base Number 30001
Kimray Inp type 5300/5400 variable Format
Tank Level1 PV ddd.dd.alt. -dd.dd
Tank Level2 SV ddd.dd.alt -dd.dd