Filter
Top Products
Administrator’s Guide and Operating Instructions
10
??EDA800
Connect the External Hard Disk Connector to EDA800 if the user
has purchased EDA800. If EDR1600 is running, please power on
EDA800 first, and then make the connection.
??PTZ Camera
Connect the PTZ camera to the RS-232(Com #2) connector at
system start up. The system supports 4 models of PTZ camera:
EverFocus ED2200, Pelco D protocol Dome, SamSung SCC-641P
and Kalatel Cyber Dome.
??CD-RW, DVD RAM, (USB port)
If the user wants to use CD-RW or DVD RAM to retrieve important
recorded images, connect it to the USB port connector at system
startup.
??Printer (USB port)
Connect the printer to the USB port connector at system startup. The
system supports 5 models of printer: HP Photo Smart P1000, HP
Desk Jet 940C/930C/5550 and EPSON Stylus Color 980.
??ZIP (Printer Port, USB Port)
If the user wants to use ZIP (Printer Port or USB Port) to retrieve
important recorded images, it must be connected to the Printer Port
Connector or USB port connector at system startup.
??Ethernet
The system is enabled control from the PC via Ethernet. Connect the
LAN connector to a standard RJ45 connector Ethernet cable. Shown
in below is an example of the connection.
??Modem
The system is enabled control from the PC via modem. Connect the
RS 232 connector to a modem. Shown in below is an example of the
connection.
??ISDN
The system is enabled control from the PC via ISDN. Connect the
ISDN connector into the ISDN card.
EDR1600
EDR1600